Pioneer DVR-745H-S Operating Instructions Manual page 116

14 The Initial Setup menu
Setting
Front Panel Display On •
Remote Control
Mode
DivX VOD
Set Preview
(HDD only)
Additional information about the TV system settings
About the input line system
This recorder is compatible with PAL,
SECAM, 3.58 NTSC and PAL-60 TV systems.
The Input Line System and Input Colour
System settings determine how the recorder
treats incoming video signals from an
external input or the built-in TV tuner.
Please note the following points when
changing the input line system:
• If, when the Input Line System setting is
changed, the screen goes blank (due to
incompatibility with your TV), you can
switch back by pressing and holding the
front panel
pressing
panel) while the recorder is stopped.
116
En
Options
Off
Recorder 1–3
(default: Recorder 1)
Registration Code Use to display the recorder's DivX registration code.
Quick Preview •
Normal
(STOP) button then
OPEN/CLOSE (also front
Explanation
The time is shown in the front panel display when the
recorder is in standby.
The front panel display is switched off in standby
(although it still lights dimly when setting a timer
recording).
If you are using more than one recorder in the same
room, set them to different IDs. This setting sets the
recorder ID; to change the remote controller ID,
press and hold RETURN then press 1, 2 or 3 to set.
The remote will only control a recorder with the same
ID.
See DivX video compatibility and DivX® VOD content
on page 11.
When in the Disc Navigator, the thumbnail video
plays short excerpts from throughout the selected
title. (Note that edited titles that will play normally
from the beginning.)
The thumbnail video plays from the beginning of the
title.
• When you switch the Input Line System
setting the Copy List is erased. If you
switch the setting using the
button and
described above, there is no
confirmation, so please use with care.
• You can't mix recordings of different TV
line systems on the same disc.
• When you change this setting, the Input
Color System setting also changes
(page 117).
(STOP)
OPEN/CLOSE buttons as