Pioneer DVR-541H-S Operating Instructions Manual page 39

Recording
7 Move the cursor to the
recording end time on the grid.
Recording start time
Easy Timer Recording
11:00 12:00 13:00
1/01
2/01
3/01
1/01 11:45
SAT
Pr 7
REC MODE
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
ENTER
8 Set the end time.
9 Select 'Yes' to set the timer
recording and exit, or 'No' to go back to
the Easy Timer Recording screen.
• You can check the timer recording
details you just set from the main timer
recording screen (see Setting a manual
timer recording on page 41).
Timer recording using the G-
Code™ programming system
This system makes programming timer
recordings very simple. Most TV guides
publish G-Code programming numbers with
their program details. If you want to make a
timer recording of a program, you just input
the corresponding code. The date, start, stop
and channel settings are made
Recording end time
14:00 15:00 16:00 17:00
– 13:45
SP HDD/DVD HDD
automatically. All you have to do is tell the
recorder the recording mode, and whether
it's a once-only recording or a regular
recording.
Note that if the country setting is incorrect
(set in the Setup Navigator), timer
recordings made using the G-Code
programming system may not work as
expected.
1 Press 'G-Code' to display the G-Code
program screen.
You can also access this screen from the
Home Menu (press HOME MENU, select
Timer Recording, then
G-Code system).
G-Code#
1 2
4 5
7 8
0
• Use the number buttons to enter the G-
Code programming number. (To clear
the last digit entered, press CLEAR.)
• You can also use the
buttons to select digits from the on-
screen display.
2 After making the settings, select
'Enter' and press ENTER.
The timer recording screen appears with the
timer program you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use
the buttons to highlight CH, then use
the buttons to set the correct channel
number.
3
6
Cancel
9
Detail
Clear Enter
05
39
En