Using The Built-In Tv Tuner - Pioneer DVR-541H-S Operating Instructions Manual

Recording
05

Using the built-in TV tuner

There are three different ways to select TV
channels. Note that you can't change the TV
channel during playback, recording or
during recording standby.
CH
CH +/– buttons
•
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
CLEAR
• Number buttons
CLEAR
For example, to select channel 4, press 4
then ENTER; for channel 34, press 3, 4,
1
ENTER.
• CH +/– buttons on the front panel
Changing audio channels
You can change the audio channel of the
broadcast or external input signal.
AUDIO
• Press to change the audio type.
The current audio channel is displayed on-
screen.
• If the NICAM audio setting (see NICAM
Select on page 112) is set to NICAM and
you are watching a NICAM broadcast,
you can switch between NICAM and
Regular (non-NICAM) audio.
• If the NICAM broadcast is bilingual, you
can also select the language.
NICAM A
Regular
Note
1 Channel presets are numbered 1 to 99.
34
En
NICAM
Regular
NICAM B
NICAM A+B
• You can also select the language for a
non-NICAM bilingual broadcast.
A (L)
A + B (L+R)
• When watching a recording made from
an external input with Bilingual
recording selected (see External Audio
on page 113), you can switch the audio
channel between left (L), right (R) or both
(L+R).
L
L+R
Note
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the LPCM
setting, only one channel of a bilingual
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Bilingual Recording setting (see
Bilingual Recording on page 113).
B (R)
R