Pioneer DVR-541H-S Operating Instructions Manual page 129

Pioneer dvd recorder operating instructions
Hide thumbs Also See for DVR-541H-S:
Table of Contents

Advertisement

Additional information
Message
• There is no DV input or the input sig-
nal is unrecordable.
• HDD optimization is recommended.
This can be done using Disc Setup.
• Please perform HDD optimization.
This can be done using Disc Setup.
• The HDD has not been sufficiently
optimized. Please optimize again.
• This signal's TV system is different
from the recorder's setting.
• Recording failed due to a TV system
mismatch. Press DISPLAY to clear mes-
sage.
• Playback has stopped because the TV
system is different than the recording.
No DV camcorder connected.
You cannot connect more than one DV
camcorder at a time.
Cannot operate the DV camcorder.
Could not operate the DV camcorder.
The DV camcorder is not set for play-
back. Please select playback mode on
the DV camcorder.
Explanation/Action
No signal was detected at the DV IN jack. This may
appear if a blank section of DV tape is playing in
the connected camcorder.
The HDD should be optimized (basically, HDD
housekeeping) to maintain playback and recording
performance.
The HDD is in more urgent need of optimization in
order to maintain performance.
If this message appears repeatedly after
optimizing the HDD it is likely that there is not
enough free space on the HDD for optimization to
complete properly. Please erase some titles from
the HDD and optimize again.
The TV system (PAL, NTSC, etc.) of the current
channel is different from the TV system settings of
this recorder.
The timer recording failed because the TV system
of the channel set for recording was different from
the setting of the recorder.
During recording or timer recording standby, the
TV System (PAL, NTSC, etc.) of the playback video
changed, causing playback to stop automatically.
The camcorder is not connected properly, or the
camcorder is switched off.
This recorder's DV jack supports connection to
just one camcorder.
This recorder cannot operate the DV camcorder.
Try switching off the camcorder then turn it back
on again.
This recorder was not able to operate the DV
camcorder.
The camcorder is in camera mode. Switch it to
playback mode.
15
129
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr340Dvr-7000Dvr-310Dvr-510h

Table of Contents