Pioneer DVR-420H Operating Instructions Manual page 83

Editing
• Divide – Divide a chapter into two or more parts:
Select the chapter you want to divide. From the
following screen use the playback controls ( , ,
, , etc.) to find the point at which you want to
divide the chapter. With Divide highlighted, press
ENTER.
Divide Chapter
Play List
DVD Title 12/01Wed 12:18AM
1 Recording Time
Divide
Back
You can keep dividing the chapter as many times as
you want (up to 999 chapters per disc). Highlight
Back and press ENTER to return to the Chapter Edit
screen.
• Combine – Combine two adjacent chapters into one:
Select the dividing line between two adjacent
chapters and press ENTER.
• Move – Rearrange chapters: Select the chapter you
want to move, press ENTER, then highlight the new
location for it, then press ENTER again.
• Preview – Preview chapters: Select the chapter you
STOP to return to the chapter
want to play; press
edit screen.
• Undo – Undo the last command.
3 Press RETURN to get back to the menu options on
the left side of the screen.
4 To return to the Disc Navigator screen, press
RETURN again, or select 'Back' from the menu
options on the left.
SP Chapter
0h01m24s 0h00m
1-3 0.00.52.17
Play Pause
Divide
Erase Section (Erase Sec)
VR mode
Using this command you can delete a part of a Play List
title, ideal for cutting out the commercial breaks in a
recording made from the TV.
1 Select 'Erase Sec' from the Disc Navigator menu
options.
2 Use the (cursor buttons) to select a
title.
After selecting a title, the Erase Sec screen appears from
which you can mark the start and end points of the
section to erase.
Erase Sec
Play List
DVD 12/01Wed 12:18AM
Title 1
Recording Time
Erase Sec
Back
3 Use the playback controls ( , ,
find the start of the section to erase, then (with
'From' highlighted) press ENTER.
The bar at the bottom of the screen shows the current
play position in the title. After pressing ENTER, a marker
appears under the bar to show the start of the section.
A
4 In the same way, find the end of the section to
erase, then (with 'To' highlighted) press ENTER.
After pressing ENTER, another marker appears under the
bar to show the end of the section, with the section itself
marked in red.
5 Select 'Yes' to confirm, or 'No' to cancel, then
press ENTER.
In the thumbnail viewer you can see a few seconds of
video either side of the marked section to see how the
edit will look.
6 Erase another section from the same title, or
press RETURN to get back to the main Disc Navigator
screen.
SP
0h01m24s
1-2 0.00.52.17
Play Pause
A B
From To
, , etc.) to
Play Pause
A B
From T
0.02.09.17
08
83
En