Display - Pioneer DVR-420H Operating Instructions Manual

Controls and displays
03

Display

1
1
Arrows indicate the copy direction between the HDD
( ) and DVD (
2 PLAY /
Lights during playback / recording; blinks when playback
/ recording is paused.
3
The ' ' and ' ' indicators light to indicate that the HDD
or DVD is selected for recording/playback.
4 PL (page 75, 81)
Lights when a VR mode disc is loaded and the recorder is
in Play List mode.
5 PM
Lights to indicate PM (after midday) for the clock display.
6 2 3 (page 95)
Shows the remote control mode (if nothing is displayed,
the remote control mode is 1).
7 REM
Lights when the character display is showing the
remaining available recording time.
8
(page 96)
Lights when the component video output is set to
progressive scan.
9 V
Lights when an unfinalized Video mode disc is loaded.
10 R / RW
Indicates the type of recordable DVD loaded: DVD-R or
DVD-RW.
11 CH (page 28)
Channel indicator for the built-in TV tuner.
22
En
2 3 4
).
REC indicators
(page 27)
5 6 7 8 9
14
12
(page 47)
Lights when a timer recording has been set.
(Indicator blinks if the timer has been set to DVD but
there isn't a recordable disc loaded, or the timer has
been set to HDD but the HDD is not recordable.)
AUTO (page 54)
Lights when Auto Start Recording has been set, and
during Auto Start Recording.
13 Recording quality indicators (page 44)
FINE
Lights when the recording mode is set to FINE (best
quality).
SP
Lights when the recording mode is set to SP
(standard play).
LP
Lights when the recording mode is set to LP (long
play).
EP
Lights when the recording mode is set to EP
(extended play).
MN
Lights when the recording mode is set to MN
(manual recording level) mode.
14 Character display
15 Channel recording indicators
(page 97)
Indicates which channels are recorded when Dual
Mono is selected.
SAP (page 29)
Lights when the currently selected TV channel has a
Second Audio Program channel.
16 OVER (page 98)
Lights when the analog audio input level is too high.
10 11 12 13
15 16