Recalling Record; How To Maintain And Store The Unit - BRASH IMPORTS 3000 Instruction Manual

5) Push the "START" button to start measurement. the pressure cuff in the
strap will automatically inflate. When the value that LCD display
increase to around 150-200mmHg, it start to decrease and the air
pressure cuff is then automatically released, when it senses your pulse,
the mark ( ) displays on LCD.
6) After measurement the screen will display systolic value, diastolic value,
pulse/min value, it will automatically store the measured results.
MON. DATE HOUR MIN.
S T AR T
mmHg
SYSTOLIC
mm Hg
DIASTOLIC
mm Hg
PULSE /
min.
7) Press "POWER" button to turn off the unit.
* Even if you forget to press the "POWER" button, power will
turn off automatically in approximately 2.5 minutes.
P OWE R
* This monitor can be stored with the air plug. Do not apply
force on the air tube.
Note: * The value measured will be too low if you hold your hand higher than
your heart lever or too high if you hold your hand lower than your
heart lever.
* Do not bend your wrist inward.
-15-
MON. DATE HOUR MIN. MON. DATE HOUR MIN.
mmHg
SYSTOLIC SYSTOLIC
mm Hg
mm Hg
DIASTOLIC
DIASTOLIC
mm Hg
mm Hg
PULSE / PULSE /
min.
min.
* The unit may store 128 measurement records, if more than 128
records, it will only store latest 128 memories.
* During measurement avoid speaking and body/hand shaking which
may affect the accuracy of record.
* During measurement process, If you want to stop, just press the
power button to stop.

RECALLING RECORD

1. Open LCD cover, press power button to enter the measurement mode.
2. Press " " button to review the first measurement in the memory.
Repeatly Press " " button to review memory data in descending order .
3. Press " " button to review the last measurement in memory. Repeatly
press " " button to review memory data in ascending order.

HOW TO MAINTAIN AND STORE THE UNIT

1. Use a dry , soft cloth to clean the unit. If desired, use a cloth lightly
dampened with tap water.
2. Do not use alcohol, benzene, thinner or other harsh chemicals to clean
the device or cuff.
-16-