Accessories Parts; Features Of The Product; Battery Installation/Replacement - BRASH IMPORTS 3000 Instruction Manual

ACCESSORIES PARTS

2 "AAA" Batteries

FEATURES OF THE PRODUCT

1. Using the fuzzy-logic measurement.
2. Memory can store 128 measurements.
3. Easy to use buttons.
4. Large and clear display.
5. Fan-shaped wrist cuff that is easy to wrap.
6. Compact size for easy carry around.
7. Easy to use, press a button to automatically measure, record
measurement values and measurement time.
8. Automatically power off (within 2.5 minutes) to save power.

BATTERY INSTALLATION/REPLACEMENT

1. Using 2 fingers press the bulges
(as the shadow in figure) parts on
both sides of battery cover, and pull
the battery cover off in the direction
as the arrow indication.
-9-
2. Install 2 "AAA" size alkaline batteries into
battery compartment make sure in
correct polarity direction (as indicated
in the bottom of battery compartment).
Store Box
3. Replace the battery cover as figure.
Note:
*
*
*
* When the battery icon flashing, the device
HOW TO REMOVE OLD BATTERY :
Depress at (+) positive side of battery so as the
battery to flip up at the other side then remove it.
If the Low Battery Indicator appears on the display, replace both batteries.
Long-life alkaline batteries are recommended.
Remove the batteries if the monitor will not be
used for an extended period of time.
With the use of two alkaline "AAA" batteries,
you can measure approximately 200 times at
room temperature of 22 C and inflating to
O
aroud 150~200mmHg once a day. But the
included batteries only for test purpose, it
may not last as specified long period.
will turn off automatically. Please replace
with new battery immediately
-10-
MON. DATE HOUR MIN.
SYSTOLIC
mm Hg
DIASTOLIC
mm Hg
PULSE /
min.