A Few Suggestions Before Blood Pressure Measurement; Wrist Monitor Quick Reference Guide; How To Take A Measurement - BRASH IMPORTS 3000 Instruction Manual

A FEW SUGGESTIONS BEFORE
BLOOD PRESSURE MEASUREMENT
1. Avoid eating, smoking, and exercising for at least 30 minutes before taking
a measurement. Also rest for at least 15 minutes before taking a reading.
2. Stress raises blood pressure. Avoid taking measurements during stressful
times.
3. The cuff should be applied on your left wrist.
4. Measurement should be taken in a quiet place and you should be relaxed,
seated position. Rest your left arm on a table so that the cuff is at the
same level as your heart.
5. Remain still and do not talk during the measurement.
6. Keep a record of your blood pressure and pulse for your doctor. Remember,
a single measurement does not provide an accurate indication of your
true blood pressure. You need to take and record several measurements
over a period of time. Try to measure your blood pressure at the same
time each day for consistency. Blood pressure measurements fluctuate
considerably.
7. Wait 5-10 minutes between successive measurements. Waiting allows the
engorged blood vessels to return to normal. You may require more rest
time depending on your individual physical conditions.

WRIST MONITOR QUICK REFERENCE GUIDE

1. Avoid eating, smoking, and exercising for at least 30 minutes before
taking a measurement. Also rest at least 15 minutes before taking your
first measurement.
2. Apply the cuff so that the monitor is on the inside of your left wrist with
the digital display in easy view.
-13-
3. Wrap the cuff snugly around your wrist so that the top and bottom edges of
the cuff are tightened evenly around your wrist. Secure the cuff in place
by pressing the pile material firmly against the sewn hook material.
4. Sit in a chair with your feet flat on the floor and place your left arm on a
table and using the store box or other object as a support so that the cuff
is at the same level as your heart.
5. Press the "POWER" button to enter.
6. After all marks display two seconds on LCD, enter the measurement
mode, press the "START" button to start measurement.
7. Finally the LCD displays systolic value, diastolic value, and pulse/min value.
8. Wait for 5-10 minutes before taking another blood pressure measurement.
You may require more rest time depending on your individual physical
conditions.

HOW TO TAKE A MEASUREMENT

Please read "A few suggestions before blood pressure measurement" and
"How to apply the wrist cuff" before taking a measurement.
1.Taking measurements while sitting down
1) Place your elbow on a table.
2) Using the store box or other object as a support, position your wrist
at heart level.
3) Relax your hand and keep palm facing up.
4) Press the "POWER" button, icons appear in two seconds on LCD, then
switch to measurement mode, And display "0" or last measurement
record.
MON. DATE HOUR MIN.
mmHg
Kpa
POWE R
1
2
-14-
MON. DATE HOUR MIN.
mmHg
SYSTOLIC SYSTOLIC
mm Hg mm Hg
1
DIASTOLIC DIASTOLIC
mm Hg mm Hg
PULSE / PULSE /
min. min.