Setting Up For Surround Sound; Choosing Your Surround Sound Settings - Pioneer S-DV303 Operating Instructions Manual

Setting up for surround sound

Choosing your surround
sound settings
To get the best possible surround sound from
your system, make the settings below. This is
particularly important when using Dolby
surround. You should only need to make
these settings once (unless you change the
placement of your speakers, or sometimes,
depending on the disc you're playing). Refer
to the following pages for details on each of
the settings.
1 Press SYSTEM SETUP (SHIFT+DVD
SETUP).
2 Use the (cursor left/right)
buttons to choose the option you want
to adjust.
It will be easiest to adjust each of the
settings in turn, following the order below.
The current setting is shown for each option
as you cycle through the display.
Front speaker distance setting (page
40)
Specify the distance from your listening
position to the front speakers.
Center speaker distance setting (page
40)
Specifies the distance from your
listening position to the center speaker.
Surround speaker distance setting
(page 40)
Specify the distance from your listening
position to the surround speakers.
Dynamic range control setting (page
40)
Compress the dynamic range of the
sound track.
Dual mono setting (page 41)
Isolate one channel when listening to
discs with dual mono encoding.
LFE attenuator setting (page 41)
Specify the peak level for the LFE
channel.
06
39
En