Brother P-touch 2400 User Manual page 106

Error Message
BUFFER
FULL!
CUTTER
ERROR!
INPUT ABCD
AT BEGIN&END
INPUT
WHOLE CODE!
102
Cause
• This message appears if you
try to enter a character, sym-
bol, barcode, space, return,
new block, or tab after 255
characters have already been
entered.
• This message appears if you
try to enter a character, sym-
bol, barcode, or space in a
layout field while using the
Auto format function after
255 characters have already
been entered.
• This message appears if the
tape cutter is closed when
you try to print or feed the
tape.
• This message appears if a let-
ter between A and D has not
been entered at the begin-
ning and end of a barcode
when the CODABAR type is
selected.
• This message appears if the
set number of digits are not
entered in the barcode data.
Solution
• Delete some existing text so
that more text can be
entered.
• Edit the text so that it only
contains the preset number
of characters.
• Turn the P-touch off, then on
again.
• Enter a letter between A and
D at the beginning and end
of the barcode.
• Input the correct number of
digits or change the number
of digits set in the barcode
parameters.