Product Setup; Quick Installation - D-Link DUB-H7 Quick Installation Manual

PrODUCT
SETUP

QUICK INSTALLATION

DUB-H7
1. Plug the power adapter into the receptor located on the
back panel of the DUB-H7. Plug the other end into a
power strip or wall outlet.
2. Plug the USB type B connector (the square end of the
supplied USB cable) into the back of the DUB-H7.
3. Plug the USB type A connector (the flat end of the
supplied USB cable) into an available USB port on your
computer.
4. Your computer will automatically detect and install the
drivers for the DUB-H7. You may now connect USB
2.0 or USB 1.1 devices to an available USB port on the
front of the DUB-H7. The two black USB ports provide
additional power for fast-charging an iPad® or similar
product when the LED is green (Fast-Charge Mode).
3