Others - Pioneer Elite BDP-05FD Operating Instructions Manual

Others

Problem Check
The power turns off Is Auto Power Off set to On?
automatically.
Is HDMI Control set to On?
The power turns on Is HDMI Control set to On?
automatically.
Inputs of connected TV and Is HDMI Control set to On?
AV system, switches
automatically.
Is an AV receiver or amplifier connected to the CONTROL IN
Player cannot be operated
with remote control. terminal on the player's rear panel?
Are you operating the remote control from a point too far away
from the player?
Are the batteries dead?
Settings you have made have • Have you disconnected the power cord while the player's
been cleared. power was on?
• Has there been a power failure?
After a disc is inserted, Are there too many files recorded on the disc?
Loading stays displayed and
playback does not start.
 is displayed in file names,
etc.
The DVD layer of BD and DVD Is Hybrid Disc Playback properly set?
hybrid discs cannot be
played.
Is Hybrid Disc Playback properly set?
The CD layer of BD and CD
hybrid discs cannot be
played.
The Hybrid Disc Playback Is a disc set in the disc tray?
setting cannot be changed
(displayed in gray).
BDMV/BDAV Playback
Is a disc set in the disc tray?
Priority setting cannot be
changed (displayed in gray).
Remedy
If Auto Power Off is set to On, the power turns off
automatically if no operation is performed for over 30 minutes
(page 42).
The player's power may turn off together with the power of the
connected TV. If you do not want the player's power to turn off
when the TV's power is turned off, set HDMI Control to Off
(page 41).
The player's power may turn on together with the power of the
connected TV. If you do not want the player's power to turn on
when the TV's power is turned on, set HDMI Control to Off
(page 41).
The inputs of the connected TV or AV system (AV receiver or
amplifier, etc.) may automatically switch to the player when
playback starts on the player or the menu screen (Home Media
Gallery, etc.) is displayed. If you do not want the inputs of the
connected TV and/or AV system (AV receiver or amplifier, etc.)
to switch automatically, set HDMI Control to Off (page 41).
Operate with the remote control of the device connected to the
CONTROL IN terminal.
Operate from within 23 feet of the remote control sensor.
Replace the batteries (page 7).
If the power cord is disconnected or there is a power failure
while the player's power is on, the settings you have made may
be cleared. Always press  STANDBY/ON on the player's
front panel or  STANDBY/ON on the remote control and
check that POWER OFF has turned off from the player's front
panel display before disconnecting the power cord. Be
particularly careful when the power cord is connected to the
AC outlet on another device because the player turns off in
conjunction with the device. We recommend plugging the
power cord into a wall outlet whenever possible.
When a disc on which files are recorded is inserted, depending
on the number of files recorded on the disc, loading may take
several dozen minutes.
The characters that cannot be displayed on this player are
displayed in .
Set Hybrid Disc Playback to DVD (page 42).
Set Hybrid Disc Playback to CD (page 42).
The Hybrid Disc Playback setting cannot be changed when a
disc is set. Remove the disc, then change the setting.
The BDMV/BDAV Playback Priority setting cannot be
changed when a disc is set. Remove the disc, then change the
setting.
07
55
En