Pioneer DVR-310 Operating Instructions Manual page 28

Getting started
04
Playing DVD discs
The table below shows the basic playback controls for
DVD-Video, and recordable DVD discs.
Press to start playback.
PLAY
If RESUME is displayed on-screen, play-
back starts from the place last stopped.
Press to stop playback.
STOP
You can resume playback from the same
point by pressing
again to cancel the resume function.)
Pauses playback, or restarts playback
PAUSE
when paused.
Press to start scanning. Press repeatedly
REV SCAN FWD SCAN
to increase the scanning speed.
Press to skip to previous/next chapter/title.
PREV NEXT
(During playback you can also use the
front panel +/– buttons.)
Except VR mode: During playback, enter a
chapter number then press ENTER to skip
directly to that chapter within the currently
playing title.
CLEAR
On some discs, you can also use the num-
CLEAR
ber buttons to select numbered items in
ENTER the disc menu.
VR mode only: During playback, enter a
title number then press ENTER.
All: Press CLEAR to clear a number entry
and start again.
(Commercial back/skip) Each press skips
CM
BACK SKIP
backward/forward progressively up to a
maximum of ten minutes forward or three
minutes back.
During playback, press to start slow-
STEP/SLOW
motion playback. Press repeatedly to
change the playback speed.
While paused, press to advance a single
frame in either direction.
Press to display the menu of a DVD-Video
disc.
TOP MENU MENU
Use the cursor buttons to navigate DVD-
Video disc menus; press ENTER to select
items.
ENTER
Press to return to the previous level of a
RETURN
DVD-Video disc menu.
Note
1. If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise
will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels
on page 53).
28
En
Playing CDs and WMA/MP3 discs
The table below shows the basic playback controls for
audio CDs
PLAY. (Press STOP
1
, and WMA/MP3 files.
Press to start playback.
PLAY
Press to stop playback.
STOP
Pauses playback, or restarts playback
PAUSE
when paused.
Press to start scanning. Press again to
REV SCAN FWD SCAN
increase the scanning speed. (There are
two scan speeds; the current scan speed
is shown on-screen.)
Press to skip to previous/next track (or
PREV NEXT
folder for WMA/MP3 disc). (During play-
back you can also use the front panel +/–
buttons.)
During playback, enter a track number
then press ENTER to skip directly to that
track.
Press CLEAR to clear a number entry and
CLEAR
start again.
CLEAR
ENTER