Programming System - Pioneer DVR-310 Operating Instructions Manual

Recording
05
3 Use
recording start date and time on the grid.
• You can move the cursor forward or back an hour at
a time using the
Easy Timer Recording
8:00
1/01
2/01
3/01
SAT
CHANNEL + / –
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can't therefore be selected. The lighter area is time
that's available.
4 Press ENTER to set the start time.
The start date and time is displayed in the middle of the
screen.
• You can go back and reset the start time if you need
to by pressing RETURN.
5 Use the
recording end time on the grid.
Easy Timer Recording
11:00
1/01
2/01
3/01
SAT
CHANNEL + / –
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to six hours can be set.
6 Press ENTER to set the end time.
7 Select 'Yes' to set the timer recording and exit, or
'No' to go back to the timer recording screen.
• You can check the timer recording details you just set
from the main timer recording screen (see Setting a
manual timer recording on page 37).
36
En
to move the cursor to the
and buttons.
Current time
Recording start time
9:00 10:00 11:00 12:00 13:00 14:00
1/01 11:45
– ––:––
Pr 7
REC MODE SP
to move the cursor to the
Recording start time
Recording end time
12:00 13:00 14:00 15:00 16:00 17:00
11:45
1/01 – 13:45
Pr 7
REC MODE
SP
Timer recording using the G-Code™

programming system

This system makes programming timer recordings very
simple. Most TV guides publish G-Code programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it's a
once-only recording or a regular recording.
Note that if the country setting is incorrect (set in the
Setup Navigator), timer recordings made using the G-
Code programming system may not work as expected.
G
-CODE
+
HOME
MENU
1 Press 'G-Code' to display the G-Code program
screen.
You can also access this screen from the Home Menu
(press HOME MENU, select Timer Recording, then
G-Code).
G-Code#
1
4
7
0
• Use the number buttons to enter the G-Code
programming number. (To clear the last digit
entered, press CLEAR.)
CH
CLEAR
CLEAR
ENTER
REC MODE
2 3
5 6
8 9
Cancel
Clear Enter