Weekly Timer Function Operation/Display - Pioneer DVD-V7300D Operating Instructions Manual

Weekly timer function operation/display

ADV.SETUP
1
WEEKLY TIMER
POWER ON START
TITLE PLAY MODE
REPEAT MODE
BAUD RATE
TRAY LOCK
BLACKBOARD LOCK
STACK MODE OSD
REV STEP/REV PLAY
2
ADV.SETUP
WEEKLY TIMER
POWER ON START
TITLE PLAY MODE
REPEAT MODE
BAUD RATE
TRAY LOCK
BLACKBOARD LOCK
STACK MODE OSD
REV STEP/REV PLAY
1/3 shows that there are three pages of setting,
3-4
and that this screen is the first of these pages.
00–00–00 –––
MON
TUE
WED
THU
FRI
SAT
SUN
ALL
5
00–04–29
SAT
MON
TUE
WED
THU
FRI
SAT
SUN
ALL
Note
÷ The internal clock has a tolerance of approximately ±2
minutes per month. (The amount varies depending on
the usage environment.)
÷ The built-in clock is powered by a capacitor. The clock
of this unit functions even when it is in the STANDBY
mode, provided that the AC cord is plugged into a power
outlet. If the AC cord is unplugged, the clock can con-
tinue functioning for 7 to 10 days (when the capacitor is
fully charged and at 25°C) .
÷ Weekly timer setting is kept remembered as if AC cord
is unplugged for long times.
50
En
page 1/2
OFF
OFF
Single
OFF
4800bps
OFF
OFF
ON
VOBU
SETUP Exit
ON
page 1/2
ON
OFF
Single
OFF
4800bps
OFF
OFF
ON
VOBU
SETUP Exit
00:00.00 (1/3)
RETURN
08:15.00 (1/3)
RETURN
I I
.
DVD. Video CD CD
Setting/correcting
the current time
Set the current date and time.
Move the ‰ (pointer) to "WEEKLY TIMER"
1.
by pressing or
2.
Press or
ENTER
3.
Press .
÷ The Weekly Timer setting screen is displayed.
ENTER
4.
Press .
÷ The date/time setting screen is displayed blinking.
5.
Set the time of the day.
÷ Set figures in order of year (2 digits), month, day, day of
the week, hour, minute and second.
These figures can be input in any of the fol-
lowing two methods.
A. Input using the numeric buttons and
B. Input using or
÷ "A" and "B" in the following description refers respec-
tively to the two operation methods above.
Example) To set to 8:15:00, Saturday April 29, 2000
0 0
=
A: Press
2
NEXT
= = =
0
NEXT
= =
5
NEXT
= =
* The days of the week can be set using the fol-
lowing numeric buttons.
MON: 0, TUE: 1,
FRI: 4, SAT: 5,
B: Press the or
ENTER
press to start the setting of the next
set of figures (the month in this case).
Set the month, date, day of the week,
hour, minute and second, and press
to complete the setting operation.
To correct the date or time
When the setting screen appears in step 3 above, press
so that the figures of the year start to blink. Then press
times so that the figures of hour blink, and set them with the
same method as above.
.
.
and set to ON.
NEXT
ENTER
and
0
NEXT 4
= = =
9
5
NEXT
= = =
8 NEXT 1
= = =
0 0
NEXT
= =
.
WED: 2, THU: 3,
SUN: 6.
to select 00 and
ENTER
ENTER
NEXT
4