Video Adjust Menu Video Adjust; Creating Your Own Interlace Output Presets - Pioneer DVD-V5000 Operating Instructions Manual

Video Adjust menu
Chapter 8
Video Adjust menu
Video Adjust
• Default setting: Standard
From the Video Adjust screen you can select the
standard video presentation or define presets of
your own.
1 Press HOME MENU and select 'Video
Adjust' from the on-screen display.
Audio Settings
Play Mode
Initial Settings
2 Use the buttons (cursor left/right)
to select a preset.
Video Adjust
Standard
• Standard – Normal
• I. Memory1–2 / P. Memory1–2 – Use for
making your own interlaced / progressive
presets (see below)
3 Press ENTER to make the setting and exit
the Video Adjust screen.
• Depending on the disc and the TV/monitor,
you may not see the effect clearly.
Video Adjust
Disc Navigator
Creating your own interlace
output presets
These presets are available when the video
output is set to interlace. (Use the front panel
PROGRESSIVE button to switch between
interlace and progressive video output. See also
page 15)
1 Select one of the Memory presets (see
above).
2 Press (cursor down) to select 'Detailed
Settings' then press ENTER.
Video Adjust
I.Memory1
Detailed Settings
3 Adjust the picture quality settings.
Interlace Memory 1 (I. Memory 1)
Recall Settings
Fine Focus
Contrast
min
Sharpness
soft
Chroma Level
min
Hue green
• Use the buttons (cursor up/down) to
select a setting.
• Use the buttons (cursor left/right) to
adjust the current setting.
• Press DISPLAY to switch between full and
single view.
• You can change the preset number from the
Recall Settings menu item.
You can adjust any or all of the following picture
quality settings:
• Fine Focus – Switch On to reveal greater
detail (high resolution) in the picture.
• Contrast – Adjusts the contrast between
light and dark elements in the picture.
I.Memory1
On
max
fine
max
red
08
39