Viewing From A Desired Camera Angle (Multi-Angle); Changing To Surround - Pioneer DV-K302CD Operating Instructions Manual

Viewing from a Desired
Camera Angle (Multi-Angle)
– DVD
You can select a camera angle when viewing DVDs with
the multi-angle option.
ANGLE : 1/4
ANGLE : 4/4
Press ANGLE during playback.
The camera angle changes each time you press the
button.
Notes
• You can use the Multi-Angle function only with discs featuring
recordings of images shot from different camera angles.
• During Multi-Angle playback, the ANGLE indicator in the
display lights.
• For some discs, selection can be made using the DVD menu.
In this case, press MENU to display the DVD menu screen and
then make your selection.
To check whether or not a disc is recorded with
angles:
The jacket of discs that are recorded with angles will be marked
with . When locations on discs that are recorded with angles
are played back, the indicator can be displayed.
To cancel the indicator, set [Angle Indicator] to "Off" in the
Setup screen Video menu described in the next section.
ANGLE : 2/4
ANGLE : 3/4
ANGLE
Turning the angle indicator on and
off
Expert
When a picture recorded in different angles is played
back, the indicator is displayed on the screen. This
setting lets you see clearly whether the playback picture
is recorded in multiple angles or not.
Turn the angle indicator on or off in the [Angle Indicator]
setting in the Setup screen Video menu in the "Expert"
menu mode (page 31).
Audio1 2 Video Language
TV Screen –
Picture Quality –
Still Picture –
On Screen Display – On
OSD Position – Normal
Angle Indicator
Move
Settings: On* ( is displayed)
Off (Not Displayed)
Note
Even when the [Angle Indicator] setting is set to "Off", the
ANGLE indicator in the display panel of the player lights during
multi-angle playback. Therefore, it is possible to know when the
multi-angle function can be used without having to display the
icon on the screen.

Changing to Surround

– DVD/Super VCD/Video CD/CD
This function can only be used when in the Normal and
2 channel mode.
Make changes to the [Surround] setting in the Setup
screen Audio 2 menu.
1 Audio2 Video Language
Surround On
Audio DRC -
Audio Out
Speaker Setting
Surround effect from 2 speakers
Move
Settings: Off*
On
Note
This functions only for audio signals output from the audio output
jack. This function is not available for the digital output jack.
General
16:9(Wide)
Standard
Field
On
Off
SETUP Exit
* Factory setting
General
Off
On
– 2 Channel
Exit
SETUP
* Factory setting
49