Setting Up The Player; Using The Setup Navigator - Pioneer DV-F727 Operating Instructions Manual

Setting Up the
Player

Using the Setup Navigator

The Setup Navigator has been designed to simplify the
process of getting the DVD player ready to perform.
Designed as a series of on-screen multiple-choice
questions, the Setup Navigator automatically sets the
audio, video, and language settings according to how the
questions are answered. Once this procedure is
complete, it will be possible to begin using the DVD
player to enjoy DVDs.
The procedure on this page describes the operations
necessary to function within the Setup Navigator
screens. A detailed description of the contents of each
question that appears on the screen can be found on
the following pages.
When setting up for the first time
If the disc rack is moving or if a disc is playing, the Setup
Navigator will not be displayed as described in the
procedure on this page. Therefore, it is recommended to
wait until the rack has stopped moving before using the
Setup Navigator. If a disc is playing, be sure to press
STOP 7 before proceeding.
1
2
3
(Cursor)
Î
1
1
Press STANDBY/ON on the front panel (
on the remote control).
20
2
3
4
5
To change the answer to a prior question
4
Move the cursor control joystick left to return to previous
(ENTER)
screens. Please note, however, that you cannot go
forward by moving the cursor control joystick right, so it
will be necessary to answer all the questions that occur
after the screen that was returned to.
To exit the Setup Navigator
Press SETUP while on any of the screens to exit the
Setup Navigator. Please note that if the Setup Navigator
is exited before all the questions are answered, no
4 1 ¡ ¢
settings are changed.
3 8
7
To return to the Setup screen
Press RETURN
the Setup screen General menu screen appears. Please
note that no settings are changed if RETURN
pressed before the Setup Navigator is finished.
Press SETUP.
When SETUP is pressed for the first time, the
following screen appears. Though the Setup
Navigator may be used more than once, this screen
only appears the first time SETUP is pressed.
Audio1 2 Video Language General
Setup Navigator
Setup Navigator Start
Not Used
Setting up using the Setup Navigator
Move Select
ENTER
Move the cursor control joystick up or down
to make a selection.
• If you are going to use the Setup Navigator, it is
not necessary to change the setting on the first
screen. Please proceed to the next step.
• If you do not want to set up the player using
the Setup Navigator, move the cursor control
joystick to select "Not Used" at this time.
The Setup Navigator function may still be used at
a later time in manual Setup screen menu
operation (page 39).
Press ENTER.
The selection is entered and the next Setup
Navigator screen appears.
Repeat steps 3 and 4 to answer the questions
on the all of the Setup Navigator screens as
described on the following pages.
. The Setup Navigator is exited and
Exit
SETUP
is