Operation – separately lockable internal box ............9 Use ......................... 9 Maintenance ....................10 Replacement of the electronic lock’s battery ............. 10 Adjustment of hinges ..................11 Most common problems and remedies ............. 12 Contact details to the KONSMETAL Service ............. 12 page 2...
Safes are usually used in banks, financial institutions and cashier rooms. Certificates for storing Valuables in accordance with the EN 1143-1 standard, grade II; Warning! In order to keep the product’s resistance grade safe or cabinet weighing up to 1 000 kg must be anchored to the ground according to the user manual.
KP Strong Safe, grade II At the end of this user manual you will find information how to conduct the most common problems. Product description Multi-layered structure of the body and door; body armor thickness - # 55 [mm], door thickness # 80 [mm].
KP Strong Safe, grade II Types of locks combination electronic Standard colors Light grey RAL 7035. Light grey RAL 9002. Black RAL 9005. * Any color from the RAL palette to order (powder coated). Specifications page 5...
KP Strong Safe, grade II Fig. 1 NOTE: The steel expansion connector should be embedded in the floor at a depth of not less than 130 mm, in concrete of at least C12/15 In order to anchor the Strong Safe to the floor, the following steps should be taken: 1.
KP Strong Safe, grade II 4. When the box is at the desired height, placed on the clips, drill holes in the wall of the interior body through the perforations in the rear wall of the box. 5. Rivet the box to the rear wall of the interior body through the prepared assembly openings.
Attention should be paid to the appropriate location of the safe, as to ensure uninterrupted opening of the safe’s door. Bolting mechanisms and locks should work smoothly and without jamming. In the case of any reservations regarding the operation of these items, problems should be reported to KONSMETAL service. page 9...
KP Strong Safe, grade II Any doubts concerning the delivered product should be reported to KONSMETAL service. No modifications without the approval of the manufacturer are recommended, even after the expiry of the warranty period. Maintenance Door: It is recommended to lubricate the hinges as necessary, however, no less frequently than once every three years using bearing grease.
KP Strong Safe, grade II Warning: Make sure that the ends of the battery with positive and negative polarity are matched correctly, as marked in the battery compartment. If the battery is installed incorrectly, running the lock will not be possible.
KP Strong Safe, grade II Most common problems and remedies 1. Key or combination lock does not close: Make sure bolts blocking the door opening are extended. If after their maximum ejection lock does not close, please contact the Service.
Need help?
Do you have a question about the Grade II and is the answer not in the manual?
Questions and answers