Stopping Playback And Switching; Power Off - Pioneer DV-C302D Operating Instructions Manual

Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
5
4
1
e
STANDBY/ON
5
2
5
5 ¢
3 ¡
1
8 E 7
3 2 4
0
4 1 ¡ ¢
7 8 3
1
1
Press STOP 7 (7 on the front panel).
Playback stops.
2
Press OPEN/CLOSE 0 (0 on the front panel).
• The disc table comes out.
• The tray rotates and the disc that was playing is
located towards the front on the left side of the
table.
3
Remove the discs.
STANDBY/ON
4
Press the DISC CHANGE to remove all discs.
5
Press ( STANDBY/ON on the front
panel).
Resuming playback from where
you stopped
–– DVD/Video CD
With this player, it is possible to resume play of a DVD or
Video CD when play has been stopped.
Press STOP 7 once to enable play to resume
from a point shortly before the DVD/Video CD was
stopped when PLAY 3 is pressed again.
• To begin disc playback from the beginning, press
STOP 7 twice to turn off resume playback, and then
start playback again.
• Pressing STOP 7 twice to causes the disc to return to
the beginning when PLAY 3 is pressed again.
Note
Resume play is only possible when the disc is loaded and
STOP 7 has not be pressed twice in succession ("RESUME" ap
pears in the display). If you want to continue viewing a DVD at a
later time or date, it is recommended to use the Last Memory
function described on page 50.
0
4 1 ¡ ¢
8
7 3
27