Pioneer DV-C302D Operating Instructions Manual page 47

To confirm the contents of a program
1 Press PROGRAM.
2 Use the 4/¢ buttons to jump to the next/previous
page of six steps (4/¢ on the front panel cannot
be used to perform this operation).
3 Press PROGRAM to exit the program screen.
To change the contents of a program
1 Press PROGRAM.
2 Jump to the page of steps with the contents you want
to change using the 4/¢ buttons (4/¢ on the
front panel cannot be used to perform this operation).
3 Use the cursor buttons (5/∞) to select the step you
want to change.
4 Move the cursor to the appropriate field using the
cursor buttons (2/3).
5 Press the number button(s) of the number you want
to change.
6 Press PROGRAM to exit the program screen.
To add to a program
Add a new Disc, Title/Track or Chapter at the end of the
program by following the steps in the section
"Programming" on the previous page.
To repeat the contents of a program
During program playback, press REPEAT. The entire
program will be repeated.
To delete a step in a program
1 Press PROGRAM.
2 Jump to the page with the contents you want to
delete using the 4/¢ buttons (4/¢ on the
front panel cannot be used to perform this operation).
3 Use the cursor buttons (5/∞) to select the step you
want to delete.
4 Press CLEAR.
5 Press PROGRAM to exit the program screen.
To clear the entire program
Pressing CLEAR when the disc is stopped will clear all
program data.
To stop program play
Press STOP 7.
Notes
• If a chapter is programmed for a disc that has not yet been
read by the player ("???" is displayed), and a CD or Video CD is
later detected in the tray, the chapter program information is
cleared. Additionally, if there is no disc in the tray, or if the
programmed chapter number is larger than the number of
chapters in the selected title, the chapter program information
is erased.
• During DVD playback, when a chapter that cannot be played as
part of program playback is encountered,
displayed, and the program automatically proceeds to the next
chapter.
• Programming is not possible during PBC playback of Video
CDs. To program Video CDs, stop playback before attempting
to make a program.
• During programmed playback, if the disc changer is rotated to
play a DVD, an asterisk may be displayed in the upper right
corner of the screen. This is to indicate that there is
information on the disc that must be played first (First Play
PGC). Depending on the disc, the asterisk may blink
continuously during playback of chapters that were not
programmed and then disappear shortly before playback of the
desired location on the disc.
or is
47