Playing Discs; Basic Playback Controls - Pioneer DV-79AVi Operating Instructions Manual

Getting Started

Playing discs

The basic playback controls for playing DVD,
CD, SACD, Video CD and MP3 discs are
covered here. Further functions are detailed
in the next chapter.
• Throughout this manual, the term 'DVD'
means DVD-Video, DVD-Audio and DVD-
R/RW. If a function is specific to a partic-
ular kind of DVD disc, it is specified.
DISPLAY AUDIO SUBTITLE ANGLE
SETUP
– MULTI SPEED +
VIDEO
ADJUST
V.ADJ
7
4 ¢
PLAY MODE SURROUND
1 2
4 5
7 8
1 If the player isn't already on, press
STANDBY/ON to switch it on.
If you're playing a DVD or Video CD, also turn
on your TV and make sure that it is set to the
correct video input.
2 Press OPEN/CLOSE to open the disc
tray.
3 Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc.
OPEN /
CLOSE
TOP MENU
MENU
ENTER
DIMMER JOG MODE
FL JOG
3 8
E E/
/
1 ¡
CLEAR
3 C
6
ENTER
9 0
TV CONTROL
Never load more than one disc at a time.
4 Press (play) to start playback.
If you're playing a DVD or Video CD, a menu
may appear. See DVD disc menus on page 38
and Video CD PBC menus on page 39 for how
to navigate these.
If you're playing an MP3 disc, it may take a
few seconds before playback starts,
depending on the complexity of the file struc-
ture on the disc.

Basic playback controls

The table below shows the basic controls on
the remote for playing discs. The following
chapter covers more playback features in
more detail.
Button What it does
Starts playback.
DVD and Video CD: if the display
shows RESUME, playback starts
from the resume point.
Pauses a disc that's playing, or
restarts a paused disc.
04
37
En