Scan Card Or Usb Disk; Set Audio Volume; Modify Network Settings; Upgrade Software - Digi-Frame DF-1710 User Manual

Scan Card or USB Disk

After inserting a USB memory card or "Flash Disk", select this menu item to scan the device for playable media
files. You will be presented with choices of making a new slideshow from the device contents, reformatting the
device, or cancelling the operation.

Set Audio Volume

Choosing this item brings up the software volume control setting and is the same as pressing the down-arrow
key during still image playback.

Modify Network Settings

This screen allows you to manually set the DF-1710's wired and wireless IP addresses, network masks, network
gateway addresses, DNS addresses and wireless system ID (ESSID). These settings are for advanced users; if
you're not using networking or are connecting your DF-1710 to a network with a DHCP server you won't need
to use this menu. See the Wireless Networking and Advanced Networking Topics sections of this manual for
more information.

Upgrade Software

If your DF-1710 is connected to the internet, selecting this option will check for a software upgrade on Digi-
Frame's website and install it if necessary. If no upgrade is required none will be performed. No personal data
or other information is transmitted or exchanged in this process. Typically the frame will reboot itself twice
during the upgrade process - allow it to complete the full process before switching it off manually.

System and Network Information

This screen displays information about the DF-1710's current status, including its current network addresses
(wired and wireless), MAC address, screen resolution, and software version. While in this menu, some of the
remote control keys have special functions as indicated in the on-screen prompts:
1) Pressing the left-arrow key forces the DF-1710 to reacquire its IP address(es) from the DHCP server
(if present), which can be useful in some network administration situations.
2) Pressing the right-arrow key reboots the unit.
3) Pressing the up-arrow key brings up the monitor controls menu. This is a special menu that has a
different appearance from the rest of the Digi-Frame menus. It is generated by the DF-1710's built-in
monitor, not the main computer.
Because Digi-Frame uses monitor controllers from a variety of manufacturers, we cannot include explicit
instructions on how to navigate the various monitor control menus. When the DF-1710 is turned on, the
monitor will perform an auto-calibration procedure and under normal circumstances no monitor settings will
need to be changed. If you do need to make changes some experimentation as to which buttons do what will
be required.
The monitor menu will disappear by itself after a period of inactivity, typically 30 seconds. To restore the auto-
calibrated settings, access the "auto" function, or if all else fails, restart your Digi-Frame. After the monitor
menu has been exited, press the Pause/Exit button to return to the Main Menu. If the monitor menu
disappears before you're finished using it, you'll need to exit the Digi-Frame menu by pressing the Pause/Exit
button, then re-enter the menu.
19
User_Manual_RP3001k.doc