Built-In Installations - Digi-Frame DF-1710 User Manual

Built-In Installations

For built-in installations remove the decorative frame and mount the adjustable brackets to your installation as
shown below. The DF-1710 can be mounted from the front or rear in this type of installation. Note that the CD-
ROM and main unit control buttons may not be useable unless you make special provision for access to them.
The bracket depth is adjustable to accommodate various wall thicknesses. The opening size for the main unit is
18-1/2" x 15-1/8", or 20" x 16" if the mounting brackets are intended to be within the opening.
14
User_Manual_RP3001k.doc