Alcatel A50 User Manual page 19

3.1.5 Managing multiple calls
With this phone you can handle multiple calls at the same time.
Swap calls
When you accept two calls, touch the
between two lines. The current call will be put on hold and you are
able to join the other call.
Conference calls
(1)
You can set up a conference call as follows.
• Place a call to the first participant of the conference call.
• Touch the icon .
• Then touch the icon and then touch the icon
conference.
• Touch to end the conference call and disconnect all callers.
3.1.6 Call settings
Touch from the Call screen, then touch Settings. The following
options are available:
Sounds and vibrate
Touch to set incoming call ringtone, and mark the checkbox to enable
dial pad tones or vibrate for calls.
Quick response
Touch to edit quick response.
Depending on your network carrier.
(1)
icon, you can now switch
to start the
35
Calling settings
• Voicemail
- Service: Opens a dialog box where you can select your carrier's
voicemail service.
- Setup: If you are using your carrier's voicemail service, this opens
a dialog box where you can enter the phone number to use for
listening to and managing your voicemail. You can enter a comma (,)
to insert a pause into the number — for example, to add a password
after the phone number.
- Sound: Touch to set the sound when a new voicemail arrives.
- Vibrate: Mark the checkbox to enable vibration when a new
voicemail arrives.
• Fixed Dialing Numbers
Fixed dialing number (FDN) is a SIM service mode, where outgoing
calls are restricted to a set of phone numbers. These numbers are
added to the FDN list. The most common practical application of
FDN is for parents to restrict the phone numbers to which their
children can dial. For security reasons, you'll be prompted to enable
FDN by entering SIM PIN2 which is usually acquired from your
service provider or SIM maker.
• Call forwarding
Touch to configure how your calls are forwarded when you are
busy, unanswered or unreachable.
• Additional settings
Touch Caller ID to use default carrier settings to display your
number in outgoing calls. Mark the Call waiting check box to notify
you of new incoming calls during a call.
Accessibility
Switch the toggle to enable hearing aids. Also set the TTY mode and
Mark the checkbox to activate noise reduction.
36