EFOY 1600 Installation Manual page 4

1. Introduction
Installation should be carried out by trained personnel
only. Wear proper work clothes. Avoid flowing garments
and wear a hair net if you have long hair. Clothing and hair
can get caught in moving or rotating parts such as in a
drill.
Be sure to leave enough space behind the installation area
when drilling or cutting out openings. Also be sure to
follow the tool manufacturer's safety instructions.
Solvents used in sealants may emit fumes. Make sure that
there is sufficient ventilation and follow the instructions
for the sealing compound.
Electrical installation work should be done by a licensed
electrician only.
All electrical lines must be adequately insulated and
protected with proper fuses.
Bare wires and contacts are not permitted.
Use the wire harness (included) to connect the unit.
Check the polarity (see illustration) before connecting the
unit.
Both sensor and power lines must always be connected.
Always use separate lines for charging and for voltage
metering to the battery. Otherwise, the flow of current will
cause false readings.
5