3. Mounting the Remote
Control
3.
Mounting the Remote Control
1
3
Flush mounting:
1
remote control
2
opening
3
frame
4
screws
1
3
Surface mounting:
1
remote control
2
surface mount
3
frame
4
screws
3.1
Mounting the Remote Control
The remote control (1) displays the current status and is
used to control the device. Mount the panel where it is
easily accessible such as in the cockpit.
If installing the panel flush with the surface of the unit,
2
make sure that there is a sufficient opening for the
electronic components behind the opening.
4
Surface mounting
2
Secure the surface mount with two screws.
Connect the remote control with the DL 1 data line
(included).
Then secure the control panel (1) with four suitable
screws (4) and place the frame (3) over the control panel.
4
15