Pioneer DV-2650 Operating Instructions Manual page 43

Audio Settings menu
1 Press HOME MENU and select 'Audio
Settings' from the on-screen display.
HOME MENU
DVD
Audio Settings
Play Mode
Initial Settings
2 Highlight Virtual Surround, then use
the / (cursor left/right) buttons to
change to '2V/SRS TruSurround' or 'Off',
as required.
Audio Settings
Audio DRC
Virtual Surround
3 Press ENTER to make the setting and
exit the Audio Settings screen.
Video Adjust
Disc Navigator
Setup Navigator
Off
Off
• You can also use the SURROUND button
on the remote control to switch Virtual
Surround on (2V/SRS TruSurround)/
Off.
• Virtual Surround doesn't work with DTS or
96kHz linear PCM audio through either
the analog or digital outputs.
• If the player is outputting Dolby Digital or
MPEG bitstream audio (in other words, no
conversion to PCM), Virtual Surround has
no effect on the audio from the digital
output. See Digital Audio Out settings on
page 46 for how to set up the digital
output formats.
• How good the surround effect is varies
with the disc.
07
43
En