What's In The Box; Putting The Batteries In The Remote; Control; Using The Remote Control - Pioneer DV-263 Operating Instructions Manual

Before you start

What's in the box

Please confirm that the following accessories
are in the box when you open it.
• Remote control
• AA/R6P dry cell batteries x2
• Audio/video cable (red/white/yellow
plugs)
• Power cable
• Operating instructions
• Warranty card
Putting the batteries in the
remote control
Incorrect use of batteries can result in
hazards such as leakage and bursting. Please
observe the following:
• Don't mix new and old batteries together.
• Don't use different kinds of battery
together—although they may look similar,
different batteries may have different volt-
ages.
• Make sure that the plus and minus ends
of each battery match the indications in
the battery compartment.
• Remove batteries from equipment that
isn't going to be used for a month or
more.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction's rules
that apply in your country or area.
H048 En
1 Open the battery compartment cover
on the back of the remote control.
2 Insert two AA/R6P batteries into the
battery compartment following the indi-
cations ( , ) inside the compartment.
3 Close the cover.

Using the remote control

Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote and the remote
sensor on the unit.
• The remote has a range of about 7m
(23ft.).
• Remote operation may become unreliable
if strong sunlight or fluorescent light is
shining on the unit's remote sensor.
01
9
En