Table of Contents
Advertisement
Table 1 Address modes in which the PL and SM
09
commands are valid
TM(Time)
CH(Chapter)
TI(Title)
TR(Track)
Table 2 Address modes in which the SE and SL commands
are valid
TM(Time)
CH(Chapter)
TI(Title)
TR(Track)
Command mnemonics
Command mnemonics consist of two-digit ASCII
alphabetic coded characters. Upper-case and lower-case
characters can be used without distinction.
Arguments
(1) Arguments are placed in front of the command.
If a command requiring an argument has no
argument, an error is generated.
(2) Arguments are of the following types:
1. Address:
The address consists of ASCII digit characters for the title
number, chapter number, track number and time code,
according to the address mode.
The address mode is determined by the TI, CH, TR and TM
commands.
If a value greater than the maximum value is attributed, the
command will not work normally.
2. Argument:
The argument expresses a parameter for commands with
arguments other than the address (KL, BS, SW, etc.).
The argument consists of ASCII alphabetic coded
characters and digit characters.
Communications interface
manual
For detailed information on the serial interface commands,
download the "BDP-V6000 Communications Interface
Manual" from the Pioneer website.
60
En
BD
DVD
CD
BD
DVD
CD
Advertisement
Table of Contents
