Table Of Contents - Pioneer DJM-700-K Operating Instructions Manual

LINE VOLTAGE SELECTOR SWITCH
The line voltage selector switch is located on the side panel of this
mixier.The factory setting for the voltage selector is 220-240V.
Check that it is set properly before plugging the power cord into
the outlet. If the voltage is not properly set or if you move to an area
where the voltage requirements differ, adjust the selector switch
as follows:
• Use a medium-sized (flat blade) screwdriver. Insert the tip of the
screwdriver into the groove of the selector switch and set it so
that the power voltage marking of your area points to the arrow.
110-120V
VOLTAGE
SELECTOR
• For Taiwan, please set to 110-120V before using.
Contents
CONFIRM ACCESSORIES..............................................4
CAUTIONS REGARDING HANDLING............................4
Location .......................................................................................... 4
Cleaning the Unit........................................................................... 4
FEATURES ....................................................................4
CONNECTIONS .............................................................5
CONNECTION PANEL ................................................................... 5
CONNECTING INPUTS .................................................................. 6
CONNECTING EXTERNAL EFFECTORS, OUTPUT
CONNECTORS ............................................................................... 7
ABOUT MIDI CONNECTORS ........................................................ 8
CONNECTING MICROPHONE AND HEADPHONES ................. 8
CONNECTING THE POWER CORD.............................................. 8
NAMES AND FUNCTIONS OF PARTS ...........................9
MIXER OPERATIONS..................................................13
FADER START FUNCTION .......................................................... 14
220-240V
EFFECT FUNCTIONS ...................................................16
PRODUCING BEAT EFFECTS...................................................... 18
MANUAL FILTER OPERATION.................................................... 19
EFFECT FREQUENCY FILTER OPERATION................................ 19
EFFECT PARAMETERS................................................................ 20
MIDI SETTINGS ..........................................................21
SYNCHRONIZING AUDIO SIGNALS TO EXTERNAL
SEQUENCER, OR USING DJM-700-S/DJM-700-K INFORMATION
TO OPERATE AN EXTERNAL SEQUENCER .............................. 21
MIDI MESSAGES ......................................................................... 22
PROGRAM CHANGE ................................................................... 24
SNAPSHOT................................................................................... 24
MIDI ON/OFF................................................................................ 24
TROUBLESHOOTING ..................................................25
SPECIFICATIONS ........................................................26
3
En