To Remove The Battery Pack; To Remove The Memory Card - Sony Cyber-Shot DSC-RX10M4 Instruction Manual

To format the memory card
When you use a memory card with this camera for the first time, it is
recommended that you format the card using the camera in order to
stabilize the performance of the memory card.
• Formatting erases all data on the memory card, including protected
images and registered settings (M1 to M4). Once erased, this data
cannot be restored. Save valuable data to a computer, etc. before
formatting.
• To perform formatting, select MENU 

To remove the battery pack

Make sure that the access lamp
(page 9) is not lit, and turn off
the camera. Then, slide the lock
lever and remove the battery pack.
Be careful not to drop the battery
pack.

To remove the memory card

Make sure that the access lamp
(page 9) is not lit, and then
push in the memory card once to
remove it.
GB
16
(Setup)  [Format].
Lock lever