Using The Fn (Function) Button - Sony Cyber-Shot DSC-RX10M4 Instruction Manual

Using the Fn (Function) button

You can register frequently used functions to the Fn (Function) button
and recall them while shooting. Up to 12 frequently used functions can be
registered to the Fn (Function) button.
1
Press the DISP button on the
control wheel repeatedly to
display a screen mode other
than [For viewfinder], and
then press the Fn (Function)
button.
2
Select the desired function by pressing the top/bottom/left/
right side of the control wheel.
3
Select the desired setting by
turning the control wheel, and
press the center of the control
wheel.
• Some functions can be fine-
tuned using the control dial.
To adjust settings from the dedicated setting screens
Select the desired function in step 2,
then press the center of the control
wheel. The dedicated setting screen
for the function will appear. Follow the
operating guide to adjust settings.
GB
14
Fn
Operation guide