1.1
Safety Precautions
!
Burrs formed during molding may be left over on some parts of the chassis. Therefore,
pay attention to such burrs in the case of preforming repair of this system.
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1
Main body (Using figures are KS-AR7002)
3.1.1 Removing the BOTTOM COVER (See Fig.1)
(1) Remove the twelve screws A attaching the BOTTOM COV-
ER.
SECTION 1
PRECAUTION
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
SECTION 3
DISASSEMBLY
A
A
A
Fig.1
A
(No.MA347)1-3