JVC KS-AR7002J Service Manual page 2

KS-AR7002
Power Output
Signal-to-Noise Ratio
Maximum Power Output
Load Impedance
Frequency Response
Input Sensitivity/Impedance
Distortion
Power Requirement
Grounding system
Dimensions (W × H × D)
Mass (approx.)
Design and specifi cations are subject to change without notice.
KS-AX5602
Maximum Power Output
RMS Power Output
Load Impedance
Frequency Response
Input Sensitivity/Impedance
Distortion
Signal-to-Noise Ratio
Power Requirement
Grounding system
Dimensions (W × H × D)
Mass (approx.)
Design and specifi cations are subject to change without notice.
1-2 (No.MA347)
SPECIFICATION
150 W RMS x 2 channels at 4 Ω and [< or =] 1% THD + N
80 dBA (reference: 1 W into 4 Ω)
800 W
4 Ω (2 Ω to 8 Ω allowance)
4 Ω (4 Ω to 8 Ω allowance) (Bridge Mode)
5 Hz to 50 kHz* ( +0, -3 dB)
* Subsonic fi lter cuts off extremely low frequency signals less than 20 Hz.
2 V/45 kΩ (0.3 V to 6 V, variable)
Less than 0.04% (at 1 kHz)
DC 14.4 V (11 V to 16 V allowance)
Negative ground
15-3/4 inch × 2-3/8 inch × 11-3/8 inch (400 mm × 60 mm × 288 mm)
11.5 lbs. (5.2 kg)
800 W
150 W RMS x 2 channels at 4 ? and [< or =] 1% THD + N
4 Ω (2 Ω to 8 Ω allowance)
4 Ω (4 Ω to 8 Ω allowance) (Bridge Mode)
5 Hz to 50 kHz* ( +0, -3 dB)
* Subsonic fi lter cuts off extremely low frequency signals less than 20 Hz.
2 V/45 kΩ (0.3 V to 6 V, variable)
Less than 0.04% (at 1 kHz)
80 dBA (reference: 1 W into 4 Ω)
DC 14.4 V (11 V to 16 V allowance)
Negative ground
400 mm × 60 mm × 288 mm
5.2 kg