Exit Setup - Acer Altos R500 User Manual

96 5 Setup utility

Exit Setup

Examine the system configuration values. When you are satisfied that
all the values are correct, write them down. Store the recorded values
in a safe place. In the future, if the battery loses power or the CMOS
chip is damaged, you will know what values to enter when you rerun
Setup.
Press the Esc key to leave Setup. The following dialog box appears:
Use the arrow keys to select your response. Press the Enter key.
If you made any changes to the Setup utility, the dialog box below is
displayed.
Use the arrow keys to select your response.
Select Yes to save the changes in CMOS.
Select No to retain the previous configuration values.
Press the Enter key to exit.