Olympus Camedia D-560 Zoom User Manual page 164

Troubleshooting
The monitor is hard to see.
Possible cause
The brightness is not
adjusted properly.
The monitor is
exposed to direct
sunlight.
Vertical lines appear
on the monitor screen.
Pictures you have taken do not appear on the monitor.
Possible cause
The power is off.
The camera is in the
shooting mode.
There are no pictures
on the card.
There is a problem
with the card.
The camera is
connected to a TV.
8
The date recorded with the image data is wrong.
Possible cause
The date/time is not
set.
The batteries are
exhausted.
The camera has been
left with the batteries
removed.
120
Corrective action
Select in the mode menu and then adjust
the brightness.
Block the sunlight with your hand.
Bright light, such as direct sunlight, may cause
vertical lines to appear on the monitor screen.
This is not a malfunction.
Corrective action
Close the lens barrier, and press
monitor on.
Press quickly twice, or close the lens
barrier and then press
playback mode.
NO PICTURE appears on the monitor. Record
pictures.
Refer to the "Error codes".
The monitor does not function when the video
cable is connected to the camera.
Corrective action
Set the date/time. The clock adjustment is not
factory-preset.
When the batteries run out, the date/time setting
is canceled or becomes inaccurate. Replace the
batteries with new ones and set the date/time
again.
If the camera is left for a while with the batteries
removed, the date/time setting is canceled. Set
the date/time again.
to turn the
to switch to the
Ref. Page
P.102
–
–
Ref. Page
P.23, 78
P.23, 79
–
P.117
P.84
Ref. Page
P.28
P.15, 28
P.15, 28