Nokia RM30 User Manual page 99

Press Menu and select Web, Settings,
module settings. Select from following options:
• Security module details
manufacturer and serial number.
• Module PIN request
using services provided by the security module. Key in the code and
select On. To disable the module PIN request, select Off.
• Change module PIN
security module. Enter the current module PIN code, then enter the
new code twice.
• Change signing
Enter the current PIN code, then enter the new code twice.
See also Access codes on page 11.
Certificates
There are three kinds of certificates: server certificates, authority
certificates and user certificates.
• The phone uses a server certificate to create a connection with
improved security to the content server. The phone receives the
server certificate from the service provider before the connection is
established and its validity is checked using the authority certificates
saved in the phone. Server certificates are not saved.
The security indicator
transmission between the phone and the content server is encrypted.
The security icon does not indicate that the data transmission
between the gateway and the content server (or place where the
requested resource is stored) is secure. The service provider secures
the data transmission between the gateway and the content server.
• Authority certificates are used by some services, such as banking
services, for checking the validity of other certificates. Authority
certificates can either be saved in the security module by the service
provider, or they can be downloaded from the network, if the service
supports the use of authority certificates.
to show the security module title, its status,
to set the phone to request the module PIN when
to change the module PIN, if allowed by the
PIN. Select the signing PIN that you want to change.
is displayed during a connection if the data
M e n u f u n c t i o n s
Security settings and Security
99