Table of Contents
Advertisement
M e n u f u n c t i o n s
To reject the invitation, press
Yes.
Settings for push to talk
There are two kinds of push to talk settings: settings for use and for
connecting to the service.
You may receive the settings for connecting to the service as a
configuration message from your network operator or service provider,
see Configuration settings service on page 13. To key in the settings
manually, see Configuration settings on page 70.
To access the settings for connecting to the service, press Menu, and
select
Push to
talk,
• Configuration. Only the configurations that support the push to talk
service are shown. Select a service provider, or Default, or
config.
for push to talk service. You may receive the push to talk
settings as a configuration message, see Configuration settings
service on page 13. To key in the configuration settings manually, see
Configuration settings on page 70.
•
Account
and select a push to talk service account contained in the
active configuration settings.
• Select one by one to set the following:
nickname,
PTT
To access the push to talk settings for use, press Menu, select
talk
and
PTT
settings. Select from following:
•
1 to 1 calls
and
incoming one-to-one calls. If you select Off, you can make but not
receive one-to-one calls. The service provider may offer some
services that override these settings.
1 to 1 calls
and
one-to-one calls with a ringing tone.
•
Listened groups
82
Exit
and Yes, or press View, Discard, and
Config.
settings. Select from following:
password,
Domain
On
to select the phone to allow the reception of
Notify
to set the phone to first notify you of incoming
and
On
to activate the listened groups.
PTT user
name,
and
Server address
Personal
Default
.
Push to
Advertisement
Table of Contents
