Table of Contents
Advertisement
Y o u r p h o n e
11.Charger connector
TM
Pop-Port
connector used, for example, for
headsets and the data cable.
12.PTT key to make a push to talk call (only if
available) or to activate the voice recorder.
13.Infrared (IR) port
14.Camera lens
■ Standby mode
When the phone is ready for use, and you have
not keyed in any characters, the phone is in
standby mode.
1. Shows the name of the network or the operator
logo.
2. Shows the signal strength of the cellular network
at your current location.
3. Shows the battery charge level.
4. The left selection key in standby mode is
Press
Go to
to view the functions in your personal shortcut list.
Select a function to activate it. Press
to' options
to view the list of available functions that you can add.
Scroll to the desired function and press
shortcut list. To remove a function from the list, press Unmark.
Select
Organise 'Go to' options
personal shortcut list. Select the desired function and press Move,
then select where you want to move the function. See also Go to
options on page 64.
5. The middle selection key in standby mode is Menu.
6. The right selection key in standby mode is
Contacts
menu or another shortcut to a function you can select. See
Personal shortcuts on page 63. Or the key has an operator-specific
name to access an operator-specific web site.
20
Go
to.
Options
and select
Mark
to add it to the
to rearrange the functions on your
Names
Select 'Go
to access the
Advertisement
Table of Contents
