Sony RM-AX4000 Service Manual page 6

RM-AX4000
To change the display to
the daylight savings time
(summer time) indication
You can select the standard time
(STD_TIME) or summer time (DS_TIME).
To change this setting, perform the
following procedure.
1
While pressing the
COMMANDER OFF button,
press the MUTING button.
COMMANDER
"SET" appears as the Display title.
LIGHT DISPLAY OTHER
If "OTHER" does not flash on the
Label keys, press the Display title
(SET) repeatedly until it appears.
2
Press "OTHER" on the Label
keys.
OTHER
"OTHER" appears as the Display title.
3
Press "DS_TIME" on the Label
keys.
DS_TIME
The setting display for daylight
savings time appears.
The current setting is shown inside
the [ ], while the other flashes.
DS_TIME [STD_TIME]
6
OFF
MUTING
SU
LEARN
SET
NG
SU
LEARN
OTHER
NG
BEEP DS_TIME CLOCK RESET
SU
LEARN
OTHER
NG
DS_TIME
4
Press the STD_TIME or DS_TIME
key.
or
STD_TIME is 1 hour behind the
DS_TIME.
DS_TIME is 1 hour ahead of the
STD_TIME.
The setting of the daylight savings
time changes and a beep sounds each
time you press the keys.
Note
In this case, the minute and second are not
changed.
5
Press and hold the
COMMANDER OFF button for
more than 2 seconds.
COMMANDER
OFF
The Remote Commander turns off.
If you want to quit before
finishing
Press and hold the COMMANDER OFF button
for more than 2 seconds. The previous status
returns, and the Remote Commander turns off.
If you want to return to the
previous display
Press the BACK button or the COMMANDER
OFF button, the previous LCD display returns.