Related Manuals for Bittel HWD9888(48)TSD-NS
Summary of Contents for Bittel HWD9888(48)TSD-NS
- Page 1 BITTEL HWD9888(48)TSD -NS Digital Wireless Phone USERS MANUAL Please read this manual before use. We bring good things to Hotel/Motel _______________________________________________________________________ _BITTEL Page 1 of 11 HWD9888 (48) TSD-NS...
-
Page 2: Unpacking Your Phone
Thank you for purchasing the NEW Bittel product. Read following carefully before using this product First, Battery Installation: Before using this product, install the chargeable battery into the handset ( Named Handset for short) . Open the battery box which locates under the back of phone , insert the battery into the right socket inside and put the cover then fixing it with the screws attached. -
Page 3: Main Features
MAIN FEATURES This design complies with the standard of indoor digital cordless phone technology requirements. Adopt HF numerical coding technical, using FHSS frequency jumping technology, 5 signal paths auto select , prevent wiretap and disturb . The Operating Distance: The phone can work well if the distance between the Master and Handset is less than 300 meter without hindrance. - Page 4 HOLD DC 6V CALL VOL- VOL+ CHARGE On Base Unit: Handset jack -- Modular jack to connect coiled handset cord from handset to telephone. Handset DATA port -- Provides access to the telephone line for connection of other devices like fax machine. Modem, etc. Telephone jack --Connect line cord from wall to telephone.
- Page 5 12. LED indicator for system working . 13. VOL key -- Off- hook mode three steps volume adjustable.(On-hook as Exit ) 14. SPKR key – Activates speakerphone function with LED indicator. 15. Redial key – Dial the last number dialed and dialed number disappear after 5 minutes.
- Page 6 How To Install Base :(View following graphic presentation ) Insert power adaptor (3) to DC6V jack of RJ11 box (4) , Then Insert the line from PBX to LINE port of RJ11 box (2), At last , connect a 4-pins line from PHONE port of RJ11 box to the TOTEL port of the telephone .
- Page 7 1) If in SPKR mode, just press the SPKR key on base , 2)Press the OFF key on HANDSET, 3) Put the handset of base on it’s cradle (handset calling mode) 3. Charging the HANDSET Under the first time to use this device or after a long time used, this device need to recharge .
- Page 8 On-hook mode press this key will off-hook and dial the number directly which has been stored . Press it again will realize on-hook mode. ( Only under on-hook mode, the above can works well ). 10. Adjust Ringer Volume Setting the ringer switch which locates on the front of the device to adjust the ringer volume to Hi/ Lo for base.
-
Page 9: Matters Need Attention
delete one or several registered handset and register the new handset set again. Detail as below : The base in On –hook mode , press[STORE] key first, then press MUTE key , then choose the HANDSET No. 1,2,3… as you like , press [STORE] key at last to confirm . -
Page 10: Warranty
THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS. THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM JURISDICTION TO JURISDICTION. This warranty is only valid for merchandise purchased directly from Bittel or from dealers or distributors Bittel Co. authorized. _______________________________________________________________________... - Page 11 (86) 633-2212119/2212113 Internet: www.chinabittel.com Email: sales @chinabittel.com Address: Shandong Bittel Electronics Co., Ltd. No. 1 Rizhao North Road, Rizhao, Shandong, 276800, China Version: VER1.0 Copyright © 2007 Bittel Inc. All rights reserved. _______________________________________________________________________ _BITTEL Page 11 of 11 HWD9888 (48) TSD-NS...
Need help?
Do you have a question about the HWD9888(48)TSD-NS and is the answer not in the manual?
Questions and answers