Page 1
BITTEL 38 SERIES PHONE USERS MANUAL Covers Models HA9888 (38) TSD-A-S HA9888 (38) TS-A-S Please read this manual before use. _______________________________________________________________________ _BITTEL Page 1 of 8 38 SERIES...
Page 2
1) Located on the left side of the 38 Series phone is a modular jack. Insert one end of the coiled handset cord into this jack (you will hear the coil cord click when properly inserted.)
Page 3
(19) Hold Key – Key steps through the three available handset /speaker volume levels (20) VOL key – [Normal – Medium – High – Normal] Note: Mute key comes standard in this model. _______________________________________________________________________ _BITTEL Page 3 of 8 38 SERIES...
Page 4
There are two ways to determine “on-hook” when phone in conversation mode 1).Put down handset 2).Press SPKR PLACING A CALL Using the Handset Lift the handset. 2) Listen for dial tone. Dial the desired number, or press [REDIAL] key to _______________________________________________________________________ _BITTEL Page 4 of 8 38 SERIES...
Page 5
5 minutes after on-hook. USING THE [HOLD] KEY Place a call on hold Press [HOLD] key to place the calling on hold. The [Hold] key indicator will get red. _______________________________________________________________________ _BITTEL Page 5 of 8 38 SERIES...
Page 6
Put back the handset in its cradle. When using speakerphone, just press [HOLD] to place the call on hold. Pick up the call at another telephone. The BITTEL phone will detect the current status and remove the hold condition at the original phone.
Page 7
FCC Approval The 38 Series telephone Series complies with Part 68 of the FCC rules. On the bottom of this telephone is a label that contains, among other information, the FCC registration number and the ringer equivalence number (REN) for this telephone.
Need help?
Do you have a question about the 38 Series and is the answer not in the manual?
Questions and answers