Download  Print this page

Advertisement

ENG
PLUG & PLAY
ANT. INPUT : CHECK
SELECT
AREA
SEARCH
SELECT
ADJUST
CLOCK
TIMER
SELECT
ADJUST
ENJOY YOUR WATCHING

Plug and Play Feature

EXIT
AUTO STORE
: ASIA W/EUROPE
: -/+
EXIT
TIME
: -- : -- AM
: OFF
EXIT
14
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result:
The message PLUG & PLAY is displayed. It flickers for
a little while and then LANGUAGE menu is automatically
displayed.
Select the appropriate language by pressing the M or L button.
2
Press the MENU button to enter the language.
Result:
The message ANT. INPUT : CHECK is displayed.
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
3
Make sure that the antenna is connected to the TV.
Press the ➛ or ❿¤button.
Result:
The AUTO STORE menu is displayed with AREA is
selected.
Select your country by pressing the ➛ or ❿ button.
4
To search the channels, select SEARCH by pressing the M or L
button, and then press the ➛ or ❿ button.
Press the MENU button to stop the search.
Result:
The TIME menu is displayed with CLOCK is selected.
Refer to "Storing Channels Automatically" on page 18.
Press the ➛ or ❿ button to move to the hour or minute.
5
Set the hour or minute by pressing the M or L button.
Refer to "Setting and Displaying the Current Time" on page
34.
6
When you have finished, press the MENU button.
Result:
The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be
activated.

Advertisement

Table of Contents

   Related Manuals for Samsung SP42W5

Comments to this Manuals

Symbols: 0
Latest comments: