Listening To Dab Digital Radio (Cs-375D) - Onkyo CS-375D Instruction Manual

> Before Start > Part Names
Listening to DAB Digital Radio
1
> Install > Playback
(CS-375D)
Tuning
Perform the following procedure when the unit is on.
1. Repeatedly press INPUT 2/1 on the remote
controller to switch input to DAB.
0 The very first time you select Tuner DAB, the Auto
Tuning function automatically scans the DAB
Band 3 for the multiplexes (i.e., stations) available
in your area.
0 Once the scanning process is complete, the
stations are stored in alphanumeric order and the
first station is selected.
0 If a new DAB station is introduced, or you move to
a new area, press (a) on the remote controller
to display the menu, then use "AUTO" in "DAB
SCAN".
2. Select the desired radio station with TUNE 3/4 (b)
on the remote controller, then press ENTER (c) to
confirm the selection.
Tuning Manually
You can tune to stations that cannot be found
automatically by using manual tuning.
1. Repeatedly press INPUT 2/1 on the remote
controller to switch input to DAB.
2. Press (a) on the remote controller to display the
menu, press 3/4 (b) to select "DAB SCAN", then
press ENTER (c).
3. Use 3/4 (b) to select "MANUAL" and press ENTER
(c).
4. The frequency changes each time you press TUNE
3/4 (b) on the remote controller. Watch the display
as you change to the required frequency, then press
ENTER (c) to confirm the selection.
Advanced Setup | Others
a
b
c
19
En