Mueller DH-5 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Mueller Manuals
  4. Drill
  5. DH-5
  6. Operating instructions manual
Mueller DH-5 Operating Instructions Manual

Mueller DH-5 Operating Instructions Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

o p E R At i n G i n S t R U c t i o n S M A n U A L
MUELLER
GAS
DH-5/EH-5
Drilling
Machines
!
WARNING:
1. Read and follow instructions carefully. Proper training and periodic
review regarding the use of this equipment is essential to prevent possible
serious injury and/or property damage. The instructions contained
herein were developed for using this equipment on fittings of Mueller
manufacturer only, and may not be applicable for any other use.
2. Do not exceed the pressure ratings of any components or equipment.
Exceeding the rated pressure may result in serious injury and/or property
damage.
3. Safety goggles and other appropriate protective gear should be used.
Failure to do so could result in serious injury.
4. Pressure test, check for and repair leaks in all fittings and components
each time one is installed or any joint or connection is broken. Failure
to find and repair a leak from any source in the fittings, by-pass lines
or equipment could result in an explosion and subsequent serious injury
and/or property damage.
5. Mueller
Drilling Machines and Equipment have been carefully
®
designed and engineered to work together as a unit. The use of equipment
manufactured by someone other than Mueller Co. may cause excessive
wear or a malfunction of the Mueller machines.
®
All warranties, expressed or implied, for Mueller Drilling Machines are
rendered null and void if the machines are used with shell cutters or
equipment manufactured by someone other than Mueller Co.

TAblE oF ConTEnTS

Reliable Connections
Customer Service Center
Decatur, Illinois
800.798.3131
www.muellergas.com
moreinfo@muellercompany.com
PAGE
2
3
4-5
6
7
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DH-5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mueller DH-5

Summary of Contents for Mueller DH-5

  • Page 1: Table Of Contents

    The instructions contained Reliable Connections herein were developed for using this equipment on fittings of Mueller manufacturer only, and may not be applicable for any other use. 2. Do not exceed the pressure ratings of any components or equipment.

  • Page 2: Dh-5 Drilling Machine General Information

    MUELLER DH-5 / EH-5 Drilling Machines ® General Information DH-5 Drilling MacHine Capacity and Use The DH-5 Drilling Machine is a hand Collar or power operated machine used for Ratchet Handle drilling holes ” to 2 ” inclusive, Locking Mechanism...

  • Page 3: Eh-5 Drilling Machine General Information

    3 ”.) For complete information on the uses of these machines and the equipment and attachments required for their use see the latest Mueller Gas Catalog at muellergas.com. Feed Tube & Yoke Working Pressure and Temperature Rating Oil Hole •...

  • Page 4: Operating Instructions

    (see Machines have been designed instruction no. 5). to permit the addition of a power 4. Apply a small amount of Mueller ® operator. The power operator will cutting grease to the leading edges drive the tools and provide automatic of the shell cutter and/or drill.
  • Page 5 MUELLER DH-5 / EH-5 Drilling Machines ® Operating Instructions 13A. dRILL MAIN – HANd 15. When drilling operation is SPECIAL NOTE: In general, the OPERATEd METHOd machines should be lubricated completed, turn operating screw on locking mechanism counter- as described in instruction No.

  • Page 6: Dh-5 Drilling Machine Parts

    NOTE: These illustrations are for parts identification only. DO NOT 44 45374 O-ring (3) use these illustrations for assembly or disassembly of machine. 45 680352 Storage Chest (not shown) Mueller Co. offers a machine repair service. Contact Mueller Customer Service Center for details. *Order both parts when replacing either one.

  • Page 7: Eh-5 Drilling Machine Parts

    NOTE: These illustrations are for parts identification only. DO NOT use these illustrations for assembly or disassembly of machine. Mueller Co. offers a machine repair service. Contact Mueller Customer TO ORDeR: Specify Part number and Part name (including catalog Service Center for details.
  • Page 8 Copyright © 2017 Mueller Co., llC. All Rights Reserved. The trademarks, logos and service marks displayed in this document herein are the property of Mueller Co., llC, its affiliates or other third parties. Products marked with a section symbol ( § ) are subject to patents or patent applications. For details, visit www.mwppat.com. These products are Form 9675 –...

This manual is also suitable for:

Eh-5

Table of Contents