Philips AVENT SCF763 User Manual

SCF763, SCF755, SCF753, SCF751
www.philips.com/avent
Philips Consumer Lifestyle BV
Tussendiepen 4, 9206 AD Drachten,
The Netherlands
Trademarks owned by the Philips Group.
©2015 Koninklijke Philips N.V.
All rights reserved
FSC
4213.354.0100.5
1
ENGLISH
Important
To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
Read this user manual carefully before you
use the spout cup and save it for future
reference.
For your child's safety and health:
WARNING!
- Check the spout cup before each use.
If any damage or crack is detected, stop
using the spout cup immediately.
- Always use this product with adult
supervision.
- Continuous and prolonged sipping of
fluids will cause tooth decay.
- Always check food temperature before
feeding.
- Prevent your child from running or
walking while drinking.
- Keep all components not in use out of
the reach of children.
- Do not heat up any liquid or food in the
microwave.
Caution
- Before first use, disassemble all parts
(fig. A) and clean and sterilize them
thoroughly. Place the spout cup in boiling
water for 5 minutes. This is to ensure
hygiene.
- Do not sterilize any part of the spout
cup in the microwave without using a
microwave sterilizer.
- Make sure all parts are properly
assembled (fig. B) before you give the
spout cup to your child.
- This spout cup is intended for use with
diluted drinks. Water and milk are the
best drinks for children of any age.
- Thick, fizzy or pulpy drinks may block the
valve and cause it to break or leak.
- This spout cup is not designed for
preparing infant formula. Do not use
the spout cup to mix and shake infant
formula as this can clog the holes and
cause the spout cup to leak.
- Do not overtighten the drinking top on
the spout cup.
- SCF751 only: Do not use the spout as a
soother.
- Do not use the spout cup with a glass
bottle.
- Do not put the spout cup in the freezer
compartment.
- To prevent scalding, let hot liquid cool
down before you fill the spout cup.
- SCF751 only: Spouts are available
separately. Use only Philips Avent spouts.
Cleaning and sterilization
- After each use, disassemble all parts
(fig. A) and clean them thoroughly in
warm water and some washing-up liquid.
You can also clean all parts on the top
rack of the dishwasher.
- Do not use abrasive or anti-bacterial
cleaning agents or chemical solvents.
- Do not place parts directly on surfaces
that have been cleaned with anti-bacterial
cleaners.
- Food coloring can discolor parts.
- After cleaning, sterilize the spout cup in
boiling water. The spout cup is also suitable
for all standard sterilization methods.
Storage
- For hygiene and maintenance, disassemble
the spout cup (fig. A) and store it in a dry
and covered container.
- Keep the spout cup away from heat
sources and direct sunlight.
Tip: The drinking top and bottle of the spout cup
are compatible with Philips Avent Natural bottles.
Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to
your Philips dealer. You can also contact the
Philips Consumer Care Centre in your country.
Guarantee and support
If you need information or support, please
visit www.philips.com/support.