Turn It On - Motorola SLVR L7c Manual

To charge using the charger:
1 Insert the
charger into
the USB
connector on
your phone
as shown.
2 Plug the other end of the charger into the
appropriate electrical outlet.
The battery indicator N flashes while
your phone is charging.
3 When your phone indicates Charge Complete
and the battery indicator stops flashing,
remove the charger.
Tip: You can safely leave the charger
connected to the phone after charging is
complete. This will not damage the battery.
When you charge the battery, the battery level
indicator in the upper right corner of the
display shows how much of the charging
12 essentials
process is complete. At least one segment of
the battery level indicator must be visible to
ensure full phone functionality while charging.
To charge from your PC, connect a cable
from your phone's mini-USB port to a high-
power USB port on a computer (not a low-
power one such as the USB port on your
keyboard or bus-powered USB hub). Typically,
USB high-power ports are located directly on
your computer.
Both your phone and the computer must be
turned on, and your computer must have the
correct software drivers installed. Cables and
software drivers are available in Motorola
Original data kits, sold separately.

turn it on

1 Open your phone.