Xiaomi MiniJ User Manual page 32

Error code Code description
Temperature sensor abnormity
Too high water level
Abnormal voltage
Problems and solutions
A.Your washing machine is installed with the fuzzy logic control system which can automatically
detect the balance of laundry during spinning. When the laundry is detected unbalanced or with
strong eccentricity by the washing machine, the machine will properly extend the spin time to
adjust the balance of the laundry or run at a lower speed when spinning in order to avoid damage
to the machine.
B.When there are excessive foams, the time on the display will cease for a spell, meanwhile the
machine is eliminating the foams rather than fault, and the machine will automatically return to
normal program if finished.
C.Before contacting After-sales Service Department:
Try to solve the problem (see "Troubleshooting").
◆
Restart the program to see if the fault still exists.
◆
If the fault persists, call after-sales service and describe the problem.
◆
● Check if the NTC plug wire is in poor contact.
● Test the resistance of temperature sensor in cold state with the multimeter
and check if it is above 1.5MΩ.
● Check if the wire and plug-in between the temperature sensor and the
computer board are in poor contact.
● Disentangle flexible pipes of the pressure switch, then test-run the machine.
● Check if there is something wrong with the drainage pump.
● Check if the hose of pressure switch is clogged.
● Power supply voltage is unstable.
● Program will run automatically after the voltage becomes stable.
● Purchase a device which can provide stabilized voltage.
31
Solution